
Paver installation
Interlocking paver surfaces for patios, drives, paths and pool decks, built on a base sized for the job it has to carry.

We install commercial pavers for Tucson businesses, HOAs and multifamily properties, from entry plazas and courtyards to drive aisles. Every job is built on a base sized for its loads and scheduled so your tenants, residents and customers can keep using the property.
Commercial hardscape pavers take a different kind of punishment from a back yard patio. Delivery vans cut across walkways, trash trucks turn in drive aisles, and a steady stream of people crosses the entrance every day. A surface that sinks or rocks becomes a trip hazard and a maintenance call.
So we size the base for the heaviest thing that will cross it, not the average, and choose paver thickness and pattern to match. Edges get heavy restraint, grades are checked for drainage and step free access, and we plan the work in phases so the property keeps an open route in and out while each section is built.
Building entrances, office and retail frontages, and gathering areas where the paving is the first thing visitors walk on.
HOA paver installation for community entries, walkways, pool surrounds and gathering spaces, including replacement of worn or heaved paving.
Paver drive lanes, drop off zones and parking courts built on a vehicle load base, including permeable paving where drainage calls for it.
Walking the site with you or your manager, noting loads, drainage, access routes and any existing paving that has failed.
A work plan that sections off active areas, keeps a clear public route, and sets out when each zone will be closed.
Excavating, compacting the subgrade and placing aggregate base in compacted lifts to the depth the loads require.
Setting pavers in a pattern suited to the traffic, fixing heavy edge restraint, filling joints and compacting the surface.
We meet you on site to look at the area, the traffic it carries and the problems you need solved.
We set out paver choices, base depth and phasing options that fit how the property operates.
A detailed written scope that a board, owner or property manager can review and compare.
We call in utility locates and work with your team on any approvals or notices the property needs.
Each section is excavated, based, laid and reopened in turn, keeping access open throughout.
We walk the finished work with your contact and go over joint care and what to watch for.
We plan around the people using the site. Phasing, signage and clear routes are part of the job from day one, not an afterthought.
And we put the details in writing. Base depth, paver thickness and edge detail are spelled out so the people who approve the work know exactly what they are getting.
Tell us about the property and the area that needs work, and we will set up a site walk.
On a commercial site the loads drive most of it. A drive aisle that carries trash trucks needs a deeper base and thicker pavers than a plaza that only sees foot traffic. Demolition of failed paving, pattern and cutting, drainage, and how much phasing the property needs to stay open all add to it. We walk the site and send a written proposal at no cost.
In Tucson, fall through spring is the most comfortable stretch, and it avoids monsoon storms soaking an open excavation. We still build year round, scheduling summer work for the cooler early hours.
Yes, for most installations. The bedding layer should be thin, about an inch, over a compacted base. A thick sand layer shifts under traffic and leads to ruts, which is why low spots must be fixed in the base, never in the sand.
No. Delivery vans and trash trucks turning on a sand bed push it sideways, and the surface ruts and sinks, which turns into trip hazards and repair calls. We size a compacted aggregate base for the heaviest vehicle that will cross it and keep the sand to a thin bedding layer on top.
It depends on the traffic, the drainage and how the property is cleaned. Polymeric sand resists washout from sweepers and pressure washing on busy entries. Permeable drive aisles need clean chip stone so water can get through. Some high traffic plazas also get a joint stabilizer or sealer. We set out the options in the written scope so the board or manager can choose.
We install commercial pavers across Tucson and the surrounding communities, including Oro Valley, Marana, Catalina Foothills, Casas Adobes, Vail, Sahuarita, Green Valley, Rita Ranch and Tanque Verde.

Interlocking paver surfaces for patios, drives, paths and pool decks, built on a base sized for the job it has to carry.

Driveways built to a vehicle load base, laid in a pattern that locks under turning tires and lifts out cleanly for repairs.

Open jointed paving over a stone reservoir that lets monsoon water soak in where it falls instead of sheeting off.
Tell us about the property, the area that needs paving and what it carries day to day. We will set up a site walk and send a written scope.
We will be in touch to set a time to visit. If it is urgent, call (520) 555-0153.