
Paver types and materials
Concrete, travertine, brick, flagstone and other natural stone compared on heat, wear, upkeep and where each one belongs.

Some patios want the weight and texture only real stone can give. We build natural stone patios in quartzite, slate, limestone, sandstone and other cut stone, choosing each one for how it handles Tucson heat, how it grips and how it will weather.
Natural stone is a broad category, and the stones in it behave very differently outdoors. Travertine and flagstone are the two we are asked about most, and each has its own specialty. This is about everything else: the cut and dimensional stones that give a patio a more architectural look.
Quartzite is dense and hard, with a crystalline sparkle and excellent resistance to wear. It holds up beautifully in a busy back yard. Slate splits into thin layers with a naturally textured face that grips well, though darker slate runs hot in direct sun. Limestone offers calm, even color in cut rectangles and squares, and suits a clean modern layout. Sandstone is warm in tone and softer underfoot, but more porous, so it benefits from sealing near pools or messy dining areas.
Color matters as much as type here. Pale stones reflect sunlight and stay cooler, while charcoal and deep brown stones absorb heat through a July afternoon. We will help you weigh the look you want against how the patio will feel at four in the afternoon.
The base matters most of all. Cut stone is set either on a screeded sand bed over a compacted aggregate base, or set in mortar on a sound slab. The choice depends on the stone's thickness and how flat it is cut.
Patios in quartzite, limestone or sandstone cut into rectangles and squares, laid in a single size or a mixed pattern.
Patios and entries in slate or split face stone, where texture and grip matter as much as color.
Stone fields with paver or brick borders, stone steps and patios that combine two or three stones for a design that suits one house.
Honest advice on which stones suit your yard, sun exposure and use, with samples to see in your own light.
Excavation, compacted subgrade and aggregate base, or slab preparation for mortar set stone, with a fall away from the house.
Stone laid to string lines and cut on a wet saw so edges and borders stay crisp.
Joint fill suited to the stone, restraint on open edges, and guidance on whether your stone should be sealed.
We measure the area, check drainage and sun, and talk about how the patio will be used.
We bring samples and walk through how each stone will perform in your yard.
A written scope covering removal, base, stone, setting method and finishing.
We order the full quantity at once so color stays consistent, and call in utility locates.
Excavation, base, setting, cutting, joint fill and cleanup.
We walk the finished patio with you, explain how to care for your stone and leave spares.
We choose stone for the yard, not just the showroom. A beautiful stone that scorches feet or stains near the grill is a poor choice, and we will say so before you buy it.
We set stone carefully. Natural stone varies in thickness and color, so we blend pieces as we lay and check the surface as we go.
Tell us what you have in mind and we will bring samples to your yard, so you can see how each stone looks in your own light.
Yes. Most natural stones handle outdoor use well, and Tucson's dry climate is kind to stone. The key is choosing a stone suited to sun, wear and water, and setting it on a proper base.
Usually not. Natural stone generally costs more than poured concrete or concrete pavers. Its appeal is the look, texture and longevity rather than a lower installation cost.
It depends on the stone you choose, its thickness, whether it is sand set or mortar set, whether a slab is needed, how much has to be removed and access to the yard. We give a written estimate after seeing the site.
A penetrating sealer made for natural stone, which soaks into the stone rather than forming a film on top. It helps resist stains without changing the look much. Not every stone needs it, and we will tell you if yours does.
Sweep it regularly, rinse it with water and clean spills promptly with a pH neutral cleaner. Avoid acidic cleaners on limestone and other calcium based stone, top up joint fill when needed and reseal when water stops beading.
We build natural stone patios across Tucson and the surrounding communities, including Oro Valley, Marana, Catalina Foothills, Casas Adobes, Vail, Sahuarita, Green Valley, Rita Ranch and Tanque Verde.

Concrete, travertine, brick, flagstone and other natural stone compared on heat, wear, upkeep and where each one belongs.

Natural travertine for patios and pool decks, prized for staying cooler underfoot than most paving in the same color.

Irregular flagstone fitted piece by piece, set dry in gravel or mortared on a slab depending on how the patio is used.
Tell us roughly how big the patio is, which stones you are considering and what is there now. We will come out with samples and send a written estimate.
We will be in touch to set a time to visit. If it is urgent, call (520) 555-0153.